Short answer
Across the Hancolor DTF range, FOB pricing runs from about US$2,500 to US$20,000 per machine, depending on configuration. The figure is driven mainly by how many printheads the machine carries, how wide it prints, and which powder and curing equipment is included. Always ask for the price of a named configuration rather than for the price of a DTF printer.
The twelve line items
| What drives the figure | Why it moves the price |
|---|---|
| Number of printheads | Our DTF range runs from two heads to eight. Each additional head is a precision component with its own ink channel, and output rises with it. This is usually the largest single difference between two DTF quotations. |
| Printhead family | Entry models use Epson XP600 heads; production models use Epson I3200-A1. The families differ in price, in speed and in the ink channel they are built for, so an identical head count does not make two machines equivalent. |
| Print width | The range starts at 300 mm and reaches just under 1200 mm. Wider machines carry a longer beam, a larger frame and more of everything that spans the width — including the shaker that has to match it. |
| Powder and shaker unit | A DTF printer is normally bought with a shaker, and the matching unit changes with width: DF-300S on the 300 mm models, HD-700N series on the 600 mm models, DF-900 and DF-1200L series on the wider ones. |
| Curing and heater equipment | Whether the heater or curing unit is one unit or two, and whether it sits inside the same offer, changes the total. It is also a line that some quotations leave out of the headline figure. |
| White ink circulation | White ink settles, so production machines recirculate and agitate it. That hardware adds cost, and it decides whether the machine can sit idle overnight without losing a working day. |
| RIP software and licences | A RIP licence is bundled, priced per seat, or offered as a trial. It is software, but it is part of the working machine and it belongs in the comparison. |
| Ink and film in the order | A starter ink set and film are sometimes included and sometimes quoted separately. The consumable value of the first order is real money and belongs in the same column as the machine. |
| Level of automation | Manual powder handling costs less to buy and more to run. Automated lines cut powder waste and remove the manual handoffs between printing, powdering and curing — which is exactly what the current industry automation demonstrations are about. |
| Spare parts in the first order | Printheads, dampers, capping stations and tubes are consumable over time. Ordering them with the machine usually costs less than buying them one emergency at a time. |
| Voltage and plug for the destination | Our machines are built for 220 V at 50/60 Hz. If the destination needs another supply arrangement, that adaptation is a real line in the quotation rather than an afterthought. |
| Shipping terms and packing | FOB and CIF are different prices for the same machine. The packing dimensions and weights of the printer and of its shaker determine the freight, so they are part of the figure you are comparing. |
Why there is no single DTF printer price
A DTF printer is a configuration rather than a catalogue item with one number. The same process is produced by an entry machine with two heads printing 300 mm wide, and by a wide machine with eight heads, each with its own matching shaker.
This is why two suppliers can both be honest and still quote figures that differ several times over. They are describing different machines, and often different scopes: one is quoting a printer, the other a production line with powder handling and curing.
The practical consequence is simple. Any figure is meaningful only together with the configuration behind it, and a price without a configuration cannot be compared with anything.
What sits at each end of the range
At the lower end are the narrow machines: 300 mm width, two printheads, a compact shaker, and a workflow in which the operator moves the film between printing, powdering and curing by hand.
At the upper end are wide multi-head lines: print widths approaching 1200 mm, six or eight I3200-A1 heads, a matching wide shaker, and the option of automated powder handling.
Between those two sits a continuous ladder of configurations. That is why the honest answer to "how much" is a band plus a configuration, not a single figure.
What to send when you ask for a price
Send the finished product and its maximum print size, the material, the expected output per day or week, the destination country, and whether you already have a heat press and a curing setup.
Those five inputs let a supplier name a configuration instead of a range. If the reply is a single figure with no configuration attached, ask again, because the answer is not yet usable.
Ask for the figure separately for the machine, the shaker, the curing unit, the RIP, the first consumables and the shipping terms. Only itemised answers can be read against another supplier.
How Hancolor prices DTF equipment
Our DTF range is published model by model with printhead model and count, print width, voltage, machine and packing dimensions, and the matching shaker for each model. The specifications come from the 2026 Hancolor catalog.
FOB pricing across that range runs from about US$2,500 to US$20,000. Because the range spans two to eight heads and 300 mm to just under 1200 mm, one number would mislead, so we quote a named configuration for your material and destination.
Send the reference, the material, the quantity and the destination, and the quotation returns itemised so that it can be read against any other offer line by line.